Datalogic Falcon X4 User Manual Download

Page: 26 / 248

Battery

Falcon™ X4

Replace the Battery

To replace the battery pack, follow the steps below:

1. Turn off the Falcon X4 (press the power key and wait for device

power off).

2. Press the latch release button, pull the battery latch down and

remove the battery pack.

3. Insert the new battery pack into the slot (

Install the Battery on

page 15

WARNING

Use only Datalogic approved batteries and accessories
for battery charging.

Risk of explosion if battery is replaced by an incorrect
type.

Dispose of used batteries according to the instructions.

Il y a risque d’explosion si la batterie est remplacée par
une batterie de type incorrect.

Mettre au rebut les batteris usagées confor mément aux
instructions.

Summary of Contents for Falcon X4

























































































































































































































































Search results

Summary of Contents for Falcon X4

Reviews:

Related manuals for Falcon X4

Brands by name

Popular brands

Datalogic Falcon X4, User Manual

Search results

Summary of Contents for Falcon X4

Reviews:

Related manuals for Falcon X4

Brands by name

Popular brands