Datalogic DX8210 Reference Manual Download Page 78

Page: 78 / 300

User Interface

DX8210 Barcode Scanner

Barcode Settings Table

Use the Barcode Settings Table to select and configure the barcodes to be read in

your application.
To edit the Barcode Settings:

1. In the menu under Modify Settings, navigate to Global Settings | Barcode

Settings. The Barcode Settings window opens.

2. Enter the appropriate information in the form as described below:

Top Panel

Displays a list of barcodes that have been added to the system with the following

columns:

Idx

Select the Idx for the row/barcode you wish to enter or edit.

If a row is disabled, a barcode type can be selected and configured for that

row.

If a barcode type is displayed in the selected row, its configuration can be

edited.

Symbology

Displays the name of the barcode symbology for that row. If no symbology has

been added for a row, disabled is displayed.

Minimum Length

Displays the minimum barcode character length for that row's symbology.

Maximum Length

Displays the maximum barcode character length for that row's symbology.

Summary of Contents for DX8210













































































































































































































































































































Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands

Datalogic DX8210, Reference Manual

Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands