Datalogic DSM0400, Product Reference Manual

Page: 149 / 252

Enter/Exit Programming Mode
Product Reference Guide 141
Code 11 Set Length 2
This feature specifies one of the barcode lengths for Code 11. Length 2 is the
maximum label length if in Variable Length on page 93 Mode, or the second fixed
length if in Fixed Length on page 93 Mode. Length includes the barcode’s check
and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length). For more detailed programming instructions
see "Set Length" on Chapter 4, References .
Table 16 provides examples for setting Length 2.
Table 16. Code 11 Length 2 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix C
‘0’ and ‘0’ ‘0’ and ‘7’ ‘0’ and ‘F’ ‘3’ AND 2’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters