Datalogic DIAMOND D531, Quick Reference

Page: 24 / 32

DATALOGIC
DEFAULT VALUES
USB DEFAULT SETTINGS
DATA FORMAT
: code identifier disabled, no field adjustment, code length not
transmitted, character replacement disabled.
USB KEYBOARD
: USA keyboard, inter-character and inter-code delays disabled,
control character emulation = ctrl+shift+key.
USB COM
: no handshaking, delay disabled, rx timeout 5 sec., ack/nack disabled,
serial decode control = disabled, serial sleep control = disabled.
Default Headers and Terminators for each USB mode:
-
USB-KBD: no header, terminator = ENTER
-
USB-KBD APPLE: no header, terminator = ENTER
-
USB-KBD-ALT-MODE: no header, terminator = CR
-
USB-COM: no header, terminator = CR-LF
-
USB-IBM-TABLE TOP: not applicable
-
USB-IBM-HAND HELD: not applicable
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 5 sec., ack/nack disabled, serial decode control = disabled, serial sleep
control = disabled.
DATA FORMAT
: code identifier disabled, no field adjustment, code length not
transmitted, no header , terminator = CR-LF , character replacement disabled.
RS232 Nixdorf DEFAULT SETTINGS
9600 baud, parity odd, 8 data bits, 1 stop bit, handshaking hardware (RTS/CTS),
delay disabled, rx timeout 9.9 sec., ack/nack disabled, serial decode
control = disabled, serial sleep control = disabled.
DATA FORMAT
: code identifier enabled, no field adjustment, code length not
transmitted, no header , terminator = CR , character replacement disabled.
RS232 Fujitsu DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 2 sec., ack/nack disabled, serial decode control = disabled, serial sleep
control = disabled.
DATA FORMAT
: code identifier enabled, no field adjustment, code length not
transmitted, no header , terminator = CR , character replacement disabled.
RS232 ICL DEFAULT SETTINGS
9600 baud, parity even, 8 data bits, 1 stop bit, handshaking RTS always on, delay
disabled, rx timeout 9.9 sec., ack/nack disabled, serial decode control = disabled,
serial sleep control = disabled.
16