Datalogic AV7000, Reference Manual

Page: 181 / 337

E-GENIUS
169
4
4.6.2 Modify Settings | Device Settings | <Camera Name> | Mounting
Use the
Mounting window when installing and calibrating the camera.
To view the Mounting window:
1. In the menu tree under Modify Settings, navigate to
Device Settings | <Camera Name>
| Mounting . The Mounting window opens.
2. View the following barcode reader information:
Field Name Definition
Camera Orientation
Mounting
Position
Select Top, Left, Right, or Bottom from the drop-down list depending on where the
camera is mounted.
This parameter allows defining the installation position of the camera in multi-
camera tunnel installations according to the code reading on the conveyor: Top,
Right, Left, etc. This parameter acts on the software reading algorithms and on the
position and height sensors configuration.
Mirroring Select Disable or Enable from the drop-down list.
This parameter (when enabled) allows inverting or mirroring the image sent by the
camera. This function is used to set the object movement with respect to the
camera mounting position (i.e. camera position = Top Back). It is used to change a
reversed (mirrored) image to proper orientation for OCR applications or video
coding.
Left/Right
Offset (Y) Enter the camera offset from the Y-axis. 0 = centered on Y. This defines the center
of the cropped image.
Automatic Calibration Parameters