Datalogic AV7000, Product Reference Manual

Page: 212 / 352

E-GENIUS
198
AV7000 LINEAR CAMERA
Serial Port | Aux Port
Use the Aux Port window to configure communication between the barcode reader and
the Host, or, in a multi-sided layout, between the Master and a Host.
To edit the Aux Port settings:
1. In the menu tree under Modify Settings, navigate to
Modify Settings | Device Set-
tings | Camera N | Serial Ports | Aux Port
. The
Aux Port
window opens.
2. Enter the appropriate information in the form as described below:
Use Global Configuration
Select the check box when using a serial focus device for one or more cameras.
Baud Rate
Select a value from 1200 to 115200 from the drop-down list. Baud Rate is the transmission
speed in a communication line.
Data Bits
Select 7 or 8 from the drop-down list. Data Bits is a parameter indicating the number of bits
composing the data packet of the communication protocol frame.
Parity
Select None, Odd, or Even from the drop-down list. Parity is a parameter indicating the
presence of a control bit in the communication protocol frame.
Stop Bits
Select 1 or 2 from the drop-down list. Stop Bits is a parameter indicating the number of stop
bits in the data packet of the communication protocol frame.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.