Datalogic AV500, Product Reference Manual, Page: 228 / 324

E-GENIUS
208
AV500 2D CAMERA
Device Settings | Camera #n | Logging
Use the Logging configuration window to configure how and what information is logged
(saved).
To view the Logging configuration window:
1. In the menu tree under Modify Settings , navigate to Device Settings | Camera #
(if applicable) | Logging . The Logging window opens.
2. View the following camera information:
“Advanced Logging” on page 209
Click the link to go to the Advanced Logging window. The main Logging options will typically be
all that is needed for standard systems. Advanced logging options are available for problem
solving on cameras not connected with the standard decoder. Enabling them may fill the event
buffer with unimportant information and therefore overwrite important information.
Verbose Mode Enable
Select the check box to verbose logging. When disabled, the debug log will provide data for
Critical, Errors, Warnings, and Info in the log text.
Verbose Timeout
Enter the number of minutes before Verbose Mode will be automatically disabled.
Every Process
Select the check box to log information from each process' system and application threads.
These threads perform similar actions for each process.
Image Saving
Select the check box to log information about image saving. This includes events to capture an
image, save image to local storage, rename the image, and transfer the image to its final
destination.
Protocol Index
Select the check box to Log information about protocol index.
3. When you have finished making changes, click Update to save or click Reset to
revert to previously saved values.