TECHNICAL SPECIFICATIONS
32
AREX™ 401
SLO External Connector
Sub-D 15 pins to terminal blocks electrical board.
Figure 21: SLO External Connector
SLO Muting Device
In order to develop a SLO Muting Device, the following connections must be made:
1
9
12
VCC
INTERLOCK_A
LASER_STOP_A
3
11
14
VCC
INTERLOCK_B
LASER_STOP_B
Figure 22: SLO Muting Device
NOTE: The laser marker is not equipped with a SLO Muting Device.
CAUTION: Do not use the SLO Muting Device for external devices, since this
will result in loss of the safety function of the machine to which this prod-
uct is installed.
Do not use the SLO Muting Device except for maintenance of this product.
CAUTION: It is the customer's responsibility to provide a correct integration
of the safety signals according to applicable regulations.
Summary of Contents for AREX 401
Page 1: ...AREX 401 USER MANUAL InfraRed Fiber Laser Marker...
Page 113: ...SLO INTEGRATION EXAMPLE USER MANUAL 105 SLO INTEGRATION EXAMPLE...
Page 140: ...RECOVER THE LASER MARKER 132 AREX 401 Press FINISH to continue Press YES to continue...
Page 145: ...USER MANUAL 137 APPENDIX G MECHANICAL DRAWINGS...
