Datalogic AI7000, Product Reference Manual

Page: 201 / 352

PRODUCT REFERENCE GUIDE
187
message.
String uses the character string entered below
Item String (Max 16 Chars.)
Identified in image name above.
Camera Specific String appends the specified string to the image file name.
Code
Code Group Index
Logical combination group number as specified in Barcode Settings | Barcode configuration
Cutting Mode
Select Disabled or Simple from the drop-down list. When Simple is selected from the options
below are revealed.
Number of Leading Characters to Cut
Enter a number indicating the number of characters to cut from the leading part of the
message.
Number of Trailing Characters to Cut
Enter a number indicating the number of characters to cut from the trailing part of the
message.
Counter: Uses a counter as described below
Counter Module
Enter the number maximum for the counter before it turns over to start at 1 again.
Alignment
Select None, Left, or Right from the drop-down list. When Left or Right is selected the options
below are revealed.
Align Length
Enter the number of characters to fill with the Align Filler Character.
Align Length is the number of characters to fill if the counter value if less than the maximum
number. Its main purpose is to make the field length consistent no matter what the counter
value.
Example:
Counter Max Number (Counter Module) = 10000
Counter Current Value = 500
Align Filler Char = X
Counter shown in Image Name = XX500 (Left Alignment) or 500XX (Right Alignment)
Align Filler Char
Enter a filler character to use with Align Length.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.