DPR-165 User Manual V-1.4
(01.07.2015)
-1-
DPR-165
TRANSFORMER STEP &
TEMPERATURE
INDICATOR
DPR-165 is a microprocessor controlled precision
instrument displaying steps and temperatures of
MV/HV transformers. The unit has a high degree
of protection against electromagnetic noises.
The unit determines the step by measuring the
resistive converter of the transformer.
The step information is displayed on the screen.
Additionally it is output through the 4-20mA
analog output. This information may be fed to
automation systems or to the next DPR-165 unit.
It can also display the step information from the
analog value coming from another DPR-165 unit.
With analog inputs and outputs, an unlimited
number of DPR-165 units may be cascaded.
The unit offers one PT100 type temperature
sensor input. This input may be used for the
transformer or ambient temperature. The alarm
level of the temperature input is adjustable and
the alarm information is output as a relay contact.
The unit offers an adjustable cable length
compensation function in order to have precise
measurements with long cables.
The unit offers 2 volt-free relay contacts rated 6A.
Any function may be assigned to these outputs,
selected from list.
Alarm levels are adjusted within the programming
mode of the unit. If no action is taken, the unit will
terminate the programming mode in 1 minute.
The standard isolated RS-485 Modbus RTU port
of the unit is free from ground potential
differences and allows safe transfer of information
to automation and monitoring systems.
The supply inputs of the unit is isolated from
measurement inputs. It operates between 88-
400VDC and 85-270VAC.
Up to 50 steps
Installation without energy interruption
Accurate step measurement input, 10 bit
16 bit analog output accuracy
10 bit analog input accuracy
PT100 temperature input, 1
°C accuracy
Cable length compensation
Automatic sensor failure detection
2 relay outputs, 6A/250Vac
Fully isolated RS-485 serial port
MODBUS-RTU communications
Logging of maximum temperature
Front panel adjustable parameters
Temperature alarm threshold level
Easy to read, 4 digits 14mm led display
Minimum 20 years data retension
Wide supply range: 88-400 VDC (85-270VAC)
Low panel depth, easy installation
Wide operating temp. range, -
20...+70°C
Sealed front panel (IP65 with gasket)
Two part connection system
DESCRIPTION
FEATURES
