204.4291.04
14
2.3.4.
C
ABLING REQUIREMENTS
After a site survey and verifying that all environment requirements are met, evaluate and compare already
installed cable plant with the requirements of the DM4610 equipment to determine if it is needed to install
new cables.
The cabling is solution-dependent and it should be planned together to network design phase. For example,
a GPON solution has different cabling requirements than an ADSL solution.
2.4.
RECEIVING A DM4610 CHASSIS AND MODULES
The DM4610 chassis is packed in a box, suitably protected by polystyrene sheets and a plastic cover, the
function of which is to protect it from damage during transport. The modules and remaining accessories are
placed in smaller boxes, protected by foam and antistatic plastic bags.
2.4.1.
V
ISUAL
I
NSPECTION
The box containing the chassis or any of the units must be sealed, dry and contain no apparent damage. If
these conditions are not met, the box must not be opened and the user should contact the DATACOM service
center.
2.4.2.
P
ACKAGE
C
HECKING
Prior to opening the packaging, check the data on its identification label with the information on the receipt.
Any divergence must be reported to DATACOM prior to opening the packaging.
2.4.3.
U
NPACKING
DM4610
C
HASSIS
Once the packaging data has been checked, the user can open it. However, we recommend this only be done
at the moment that the unit is ready to be installed, as while packed it is protected from accidents.
The packaging includes the following items:
•
1 x Mechanical structure (Standalone Chassis)
•
1 x Fan Module
•
1 x Power Supply Module (at least)
•
1 x Power cable per power supply module
•
2 x Lateral brackets
•
12x Screws (6 for each lateral bracket)
•
1 x Set of accessories, comprised of a serial cable and an antistatic wristband
See more details about DM4610 packaging on
2.4.4.
U
NPACKING
DM4610
M
ODULES
Each module is packaged into an individual box and antistatic bag that protect it during transportation and
handling.
See more details about DM4610 packaging on
During all opening package process, use the antistatic wristband. This care avoids
damage to the modules.
