© 2017 Datacom Systems Inc
17
SS-1200, SS-2200, SS-4200 Series USERguide
Connectivity/Authentication Functionality:
Connectivity to the configurable product is made
through the Management RJ45 or Serial DB9 port and authentication is required. This password
protection yields read-only access. To make configuration changes, Superuser (SU) mode must be
accessed with another password.
4.2.2
Initial Login (Default)
Base Prompt:
This is the text presented to the user logging in to use the CLI (default values
shown). All Usernames and passwords are case-sensitive.
Read-Only Log in:
Enter Username: Administrator
Enter Password: admin
>
SuperUser log in:
> SU
Enter Password: password
#
4.2.3
Password Recovery
In order to recover a lost password on a SS
series device, you must have access to a serial
connection, and access to the power inputs to
the tap.
Open a support case by filling out the
pertinent information at:
http://www.datacomsystems.com/support/con
tact-support
You will be sent a password recovery tool
and associated instructions by email. By
following these instructions you can reset
both passwords on the tap.
