28
Performing Color Evaluations
CHECK II Quick Start Guide
The information stored includes:
Sample name
Sample type
Date/time of measurement
Instrument settings (aperture setting,
measurement condition (SCI, SCE or
Gloss), etc.
Spectral and colorimetric data
Tolerances
Performing Color Evaluations
Overview
The evaluation screen is where you
will do most of your work. At the right
is a color evaluation screen.
TIP
If the evaluation screen is not
displayed, press the
Return
button on
the Control Panel to return to the last
active evaluation screen.
From this screen, you can do the
following:
Measure new samples.
Simply press the
Measure
button.
Change the color evaluation being displayed.
Tap the
down arrow (
) next to
CIELab
for a list of selections. Tap on
an evaluation in the list.
Change the Illuminant/Observer combination.
Tap the
down arrow (
) next to
D65/10
for a list of selections. Tap on
an Ill/Obs combination in the list.
Change the standard or batch used.
Tap the arrow (
) next
to
DK BLUE STD
to retrieve or measure a different standard.
Tap the arrow (
) next to
DK BLUE BAT -1A
to change the
batch selection.
