Datacolor AHIBA IR User Manual Download

Page: 45 / 52

Ahiba IR User's Guide

Appendix

•

Maintenance List

Below is a routine maintenance checklist and schedule of tasks that should be
performed to insure the proper operation of the unit.

Machine Part/
Procedure

Party Responsible

for Maintenance

Every
Cycle

Quarterly

Yearly

Accessories

Wash beakers, beaker
lids, and dosing
accessories thoroughly.

Flush nipples with clean,
warm water..

User

Machine

Keep the interior surfaces
clean and shiny in order
to maximize reflection.

User

Dyeing Beaker

Check for leaks.

Replace O-ring if
necessary.

User

Drive

Check belts and listen for
drive noise.

If necessary, adjust or
replace belts

Datacolor Service

Speed of the Drive

Check and calibrate, if
necessary.

Tolerance =

2 rpm.

Datacolor Service

Temperature

Calibration

Check the temperature
calibration and adjust if
necessary.

Tolerance

1°C

NOTE: Contact Datacolor
Service personnel to
complete this check.

Datacolor Service

personnel

Gradient Test

Test and ensure
maximum achievable
gradient is within
tolerance. Make repairs
as needed.

Datacolor Service

personnel

Summary of Contents for AHIBA IR





















































Search results

Summary of Contents for AHIBA IR

Reviews:

Related manuals for AHIBA IR

Brands by name

Popular brands

Datacolor AHIBA IR, User Manual

Search results

Summary of Contents for AHIBA IR

Reviews:

Related manuals for AHIBA IR

Brands by name

Popular brands