Datacolor 9020-0129 Operating Manual Download

Page: 75 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 75/126

When operating the cabinet without water connection, turn off humidity control in the “set-
points” menu (chap. 6.3) in order to avoid humidity alarms.

11.2 State of alarm

Visual indications in Normal display: alarm message, screen header flashing in red color

Audible alert, if the buzzer is enabled (chap. 11.5).

Normal display in state of alarm (example for
cabinet with lights).

(a)

Screen header flashing in red color and
showing the alarm message

(b) Alarm

icon on the bottom of the screen:

change to the list of active alarms and
alarm acknowledgement

(c)

If applicable, information icon in the screen
header. Indication of a certain condition

11.3 Resetting an alarm, list of active alarms

Normal display in state of alarm (example for
cabinet with lights).

Press the

Alarm

icon

List of active alarms.

Press the

Reset alarm

icon.

Pressing the

Reset alarm

icon mutes the buzzer for all active alarms. The icon then disappears.

•

Acknowledging while the alarm condition persists: Only the buzzer turns off. The visual alarm indica-

tion remains on the controller display. The alarm remains in the list of active alarms.

When the alarm condition has ended, the visual alarm indication is automatically cleared. The alarm is
then no longer in the list of active alarms.

•

Acknowledging after the alarm condition has ended: The buzzer and the visual alarm indication are

reset together. The alarm is then no longer in the list of active alarms.

•

The zero-voltage relay alarm output resets together with the alarm.

(a)

(c)

(b)

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands