Datacolor 9020-0129 Operating Manual Download

Page: 100 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 100/126

15.4 Counter of operating hours (cabinet with lights)

Path:

Main menu > Service > Counter

There are two counters: one for the cabinet operating hours and the other for the operating hours of the
illumination.

Both counters can be reset independently. The rest menu is available only for users with “Service” au-
thorization. To have the values reset, please contact your local Datacolor service representative.

15.5 Technical information on the cabinet

Path:

Main menu > Device info

Cabinet name and setup

Versions of CPU, I/O module and safety con-
troller

for Datacolor
service

Information on digital and analog inputs and
outputs and phase angle outputs

for Datacolor
service

Information on modbus analog and digital
inputs

for Datacolor
service

Information on Ethernet connection, MAC
address display

chap. 14.5.1

Back to main menu

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands