![background image](http://html1.mh-extra.com/html/datacard/cr825/cr825_installation-and-administrators-manual_3689160059.webp)
CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide
43
Print Bar Codes
Bar code design follows a set of standards based on the type of bar code produced. Bar codes
contain a series of black lines (bars) separated by white areas (spaces). Each character of encoded
data is represented by a set of bars and spaces. A bar code standard specifies the number and
width of bars and spaces needed to encode a character. The standard also specifies the minimum
size of the white area, or quiet zone, that surrounds the bar code.
Bar Code Guidelines
Bar codes print more successfully when you observe the following guidelines. Follow the
standards for the type of bar code you are printing.
Bar Code Placement
Maintain the required quiet zone around the actual
bar code, as shown in the illustration.
Locate bar codes at least 0.25 inch (6.3 mm) from
other printing and from the edge of the card.
Bar Code Size
A lower density bar code is easier to read, because the bars are wider and spaced farther
apart.
The width of the narrow elements in the bar code must be large enough to be read
consistently. The capabilities of the bar code reader can influence this.
The bar code must be tall enough to be read under normal conditions.
quiet zone
0.25 in
6.3 mm
Summary of Contents for CR825
