![background image](http://html1.mh-extra.com/html/datacard/cr825/cr825_installation-and-administrators-manual_3689160046.webp)
30
Printer Installation
3.
Insert the 125-card output hopper into the printer and
pedestal until it clicks into place.
4.
Follow the instructions included in the upgrade kit to
complete the installation.
Connect to the Printer
You can connect to the printer from a Windows-based PC through a network (an Ethernet cable is
not supplied with the system).
1.
Connect one end of the Ethernet cable to
the network connection port on the printer.
2.
Connect the other end to a network port.
3.
Refer to
and the CardWizard and Card Printer Setup
Guide for information about how to define
the printer to CardWizard software.
Summary of Contents for CR825
