DataCard CR825, Installation And Administrator'S Manual

Page: 130 / 140

A-10 CE875 Instant Issuance System
Use the Optional Cable Lock
You also can secure the embosser using the optional
cable lock.
1.
Locate the security plate receptacle at the back of
the embosser.
2.
Insert the security plate vertically into the receptacle
from below the embosser with the open end toward
the embosser.
3.
Insert the T-bar of the cable lock through the opening
into the security plate.
4.
Follow the instructions included with the cable lock to complete the installation.
Cable Lock
Receptacle