![background image](http://html1.mh-extra.com/html/datacard/cr805/cr805_user-manual_3686106083.webp)
CR805 Retransfer Card Printer User’s Guide
67
Printing includes unexpected data
Problem
Probable Cause
Solution
Text that was intended
for the magnetic stripe
printed on the card
instead.
The magnetic stripe font
was not applied to the
text.
Refer to “Magnetic Stripe Fonts” in the
printer’s Driver Guide.
The escape was typed
incorrectly.
Refer to “Magnetic Stripe Escapes” in the
printer’s Driver Guide.
The text to encode was
longer than one line.
Reduce the font size to keep all text on one
line.
Several blank cards are
ejected before the full
card prints.
The application uses the
page size that is in effect
when a card design
document is created.
Setting the page size after
creating the document
can cause errors.
Use the page setup feature of the application
to set the page size before creating the
document. Consider creating a template for
cards that opens at the correct page size.
Summary of Contents for CR805
