DataCard CR805, User Manual

Page: 41 / 136

CR805 Retransfer Card Printer User’s Guide 25
4.
Press E
NTER
to display the IP address. Record the IP address.
5.
Press E
NTER
to return to the Network IPv4 menu. Subnet Mask
displays on line 2.
6.
Press E
NTER
to display the subnet mask. Record it, if necessary.
7.
Press E
NTER
to return to the Network IPv4 menu. Gateway
Address displays on line 2.
8.
Press E
NTER
to display the gateway address. Record it, if
necessary.
9.
Press E
NTER
to return to the Network IPv4 menu.
10.
Press the down arrow key to scroll to Exit on line 2.
11.
Press E
NTER
. Then, press the U
SER
button to return the printer
to Ready. The U
SER
button glows green.
Retrieve an IPv6 Address
A printer on an IPv6 network can be configured to use one or more of the following methods,
depending on how the network is set up:

Link Local IPv6 address: The printer and PC clients are restricted to the same subnet. Link
local is enabled automatically when IPv6 is enabled and offers the best security for your
network.

DHCPv6: A DHCPv6 server is externally configured to give out an IPv6 address.

Stateless Address AutoConfiguration (SLAAC): One or more routers with IPv6 enabled on the
subnet give out a subnet prefix that allows access to IP addresses.

Manual IPv6 Address: The printer has a designated IPv6 address on a specified subnet. The
address does not change without manual intervention. This is similar to an IPv4 static IP
address.