manualshive.com logo in svg

DataCard CD820, User Manual, Page: 46 / 72

Share
Download
DataCard CD820 User Manual Download Page 46

 

 34

System Maintenance

Clean the Printer

1. 

Make sure that you have prepared the printer for cleaning. Refer to 

“Prepare the Printer for 

Cleaning” 

on 

page 33

.

2. 

Press the U

SER

 button. 

Suspended displays on line 1 of the LCD panel. 

3. 

Press E

NTER

. 

4. 

Maintenance displays on line 2 of the LCD panel. Press E

NTER

 

to enter the Maintenance menu. 

5. 

Cleaning Card displays on line 2 of the LCD panel. Press 
E

NTER

 to enter the Cleaning Card menu. 

6. 

Printer displays on line 2 of the LCD panel. Press E

NTER

. 

7. 

Start displays on line 2 of the LCD panel. Press E

NTER

 to start 

the cleaning process. 

8. 

Insert cleaning card displays on the LCD panel. Press the U

SER

 

button to start the cleaning cycle. 

The printer picks the cleaning card from hopper 2 (H2) and 
moves it through the printer several times. The used cleaning 
card is placed in the reject tray.

The printer returns to Ready when the cleaning cycle completes.

Continue with 

“Clean the Multi-Hopper Rollers” 

on 

page 35

.

Summary of Contents for CD820









































































Reviews:

No comments