4 Using the control module
Clarity Controls
should be lower than in the
Shimadzu LC-10/20 Pump Setup
dialog, as
Clarity
reacts on exceeding of that value and should react before the
pump does so.
Min Pressure
Sets the minimum pressure allowance of the pump. This value is sent to
the pump and when the pressure falls below this value, pump will react on
it. The pressure check is also present in
Clarity
, in the
Method Setup - LC
Gradient - Gradient Options
dialog. Value of
Min Pressure
set there
should be higher than in the
Shimadzu LC-10/20 Pump Setup
dialog, as
Clarity
reacts on falling below that value and should react before the
pump does so.
Key Lock
Serves for making the
Shimadzu LC-10/20 Pump
keyboard inactive.
- 14 -
