Data Translation MACH Series, Getting Started Manual

Page: 6 / 62

About this Manual
vi
• Chapter 5 , “Installing and Configuring the Device Driver,”
describes how to install and configure the device driver; and
• Chapter 6 , “Verifying Board Operation,” describes how to verify
the board’s operation using DT-Acquire.
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold .
•
Courier font
is used to represent source code.
Related Information
Refer to the following documents for more information on using a
DT3154 board:
• The DT3154 User’s Manual (UM-16345), included on the Imaging
OMNI CD

provided with the DT3154 board, describes the
features of the DT3154 board and DT3154 Device Driver in detail.
• Frame Grabber SDK User’s Manual (UM-13442) and online help,
included on the Imaging OMNI CD provided with the DT3154
board, describe the Dynamic Linkable Library (DLL) that you can
use to write image acquisition application software.