Data Translation DT9850 Series, User Manual, Page: 44 / 104

Chapter 4
44
Testing Single-Value Analog Output
To verify that the module can output a single analog output value, do the following:
1. Connect an oscilloscope or voltmeter to analog output channel 0 on the module. Refer to
page 36 for an example of how to connect analog output signals.
2. In the QuickDataAcq application, choose Single Analog Output from the Control menu.
3. Select the appropriate DT9850 Series module from the Board list box.
4. In the Channel list box, select analog output channel 0.
5. In the Range list box, select the output range for analog output channel 0. The default is
±10 V.
6. Enter an output value or use the slider to select a value to output from the analog output
channel.
7. Click Send to output a single value from analog output channel 0.
The application displays the output value both on the slider and in the text box.