Data Translation DT9820 Series, User Manual

Page: 16 / 112

Chapter 1
4
Supported Software
The following software is available for use with the DT9820 Series
modules:
• DT9820 Series Device Driver
−
This software is provided on the
Data Acquisition OMNI CD that is shipped with the module. The
device driver allows you to use a DT9820 Series function module
with any of the supported software packages or utilities. Refer to
the DT9820 Series Getting Started Manual (UM-18219) for more
information on configuring the device driver.
• DT9820 Series Calibration Utility
−
This software is provided on
the Data Acquisition OMNI CD-ROM. The DT9820 Series
Calibration Utility allows you to calibrate the analog output
circuitry of the DT9822 function modules. The analog input
circuitry is automatically calibrated when the module is powered
up. Refer to
Chapter 5 for more information on this utility.
• Quick Data Acq application
−
This software is provided on the
Data Acquisition OMNI CD that is shipped with the module. The
Quick Data Acq application provides a quick way to get up and
running using a DT9820 Series function module. Using this
application, you can verify key features of the module, display
data on the screen, and save data to disk. Refer to the DT9820
Series Getting Started Manual for more information on using the
Quick Data Acq application.
• Scope application
−
This software is shipped with the board on
the Data Acquisition OMNI CD. This application emulates three
basic instruments: a simple oscilloscope chart recorder, a data
logger, and a multi-channel oscilloscope. Using the Scope
application, you can monitor data online and capture it to disk.
Refer to the online documentation provided on the CD-ROM for
more information.