manualshive.com logo in svg

Data Translation DT9800 Series, User Manual

Share
Download
Data Translation DT9800 Series User Manual Download Page 101

Programming Flowcharts

89

4

4

4

4

4

4

4

4

4

Set Subsystem Parameters

For A/D operations, specify the channel type as 
single-ended (for single-ended or 
pseudo-differential channels), or differential. For 
all other operations, specify differential (the 
default).

Specify the data encoding type as binary 
(OL_ENC_BINARY). This is the default value.

For the A/D subsystems on the DT9801, 
DT9801-MAC, DT9801-EC, DT9801-EC-I, 
DT9802, DT9802-MAC, DT9802-EC, and 
DT9802-EC-I, specify the voltage input range as 0 
to 10 V or ±10 V (the default).

For the A/D subsystems on the DT9803, 
DT9803-MAC, DT9803-EC, DT9803-EC-I, 
DT9804, DT9804-MAC, DT9804-EC, 
DT9804-EC-I, DT9805, and DT9806, specify the 
voltage input range as 

±

10 V. The input range and 

the gain determine the effective input range. See 

page 19

 for more information. 

For D/A subsystems on the DT9802, 
DT9802-MAC, DT9802-EC, and
DT9802-EC-I, specify the voltage output range as 
0 to 10 V, 0 to 5 V, ±10 V (the default), or ±5 V. For 
D/A subsystems on the DT9804, DT9804-MAC, 
DT9804-EC, DT9804-EC-I, and DT9806, specify 
the voltage output range as ±10 V. 

The step is unnecessary for DIN and DOUT 
subsystems.

Specify the channel type using 

olDaSetChannelType

.

Specify the data encoding using 

olDaSetEncoding

.

Specify the voltage range using 

olDaSetRange

.

Summary of Contents for DT9800 Series



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands