Data Translation DT351, Getting Started Manual

Page: 6 / 52

About this Manual
vi
• Chapter 3 , “Installing the Board,” describes how to install the
DT351 board and load the DT351 Device Driver.
• Chapter 4 , “Loading and Configuring the Device Driver,”
describes how to configure the device driver to use interrupts.
• Chapter 5 , “Attaching a Screw Terminal Panel,” describes how to
attach and configure the STP37 screw terminal panel.
• Chapter 6 , “Wiring Signals,” describes how to wire signals to the
STP37 screw terminal panel.
• Chapter 7 , “Verifying the Operation of a DT351 Board,” describes
how to verify the operation of a DT351 board with the Quick
Data Acq application
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold.
•
Courier font
is used to represent source code.