Data Translation DT351, Getting Started Manual

Page: 48 / 52

Chapter 7
42
Running the Quick Data Acq Application
To run the Quick Data Acq application, perform the following steps:
1. If you have not already done so, power up your computer and
any attached peripherals.
2. Ensure that you installed the Quick Data Acq application
software from the Data Acquisition OMNI CD-ROM using the
instructions starting on
page 40 .
3. Select Quick Data Acq from the Data Translation, Inc\Quick
Data Acq program group.
Note: The Quick Data Acq application allows you to verify basic
operations on the module; however, it may not support all of the
module’s features.
For information on each of the features provided, use the online help
for the Quick Data Acq application by pressing F1 from any view or
selecting the Help menu.
For detailed information on the supported features of the board,
refer to the DT351 User’s Manual (see
page 11 for information on
viewing this manual).