Data Translation DT340, Getting Started Manual

Page: 15 / 70

Preparing to Use a DT340 Board
7
2
2
2
2
2
2
2
2
2
Unpacking
Open the shipping box and remove the wrapped DT340 board.
Verify that the following items are present:
• DT340 data acquisition board, and
• Data Acquisition OMNI CD.
If an item is missing or damaged, contact Data Translation. If you are
in the United States, call the Customer Service Department at (508)
481-3700. An application engineer will guide you through the
appropriate steps for replacing missing or damaged items. If you are
located outside the United States, call your local distributor, listed in
your Data Translation Product Handbook.
Once you have unpacked your board, check the system requirements,
as described in the next section.
CAUTION:
Keep the board in its protective antistatic bag until you are ready to
install it; this minimizes the likelihood of electrostatic damage.