Data Translation DT3153, Getting Started Manual

Page: 20 / 64

Chapter 2
12
Installing the DT3153 Documentation
If you are using Windows 98 or Windows Me and installed the
DT3153 device driver, the DT3153 documentation is automatically
copied to your hard drive. Refer to the next section for information on
viewing these documents.
If you are using Windows 2000 or Windows XP, perform the
following steps to install the DT3153 documentation:
1. Insert the Imaging OMNI CD into your CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3. In the Command Line edit box, enter x:\LAUNCH.EXE (where x
is the letter of your CD-ROM drive) .
4. Click OK .
The Imaging OMNI CD splash screen appears.
5. Click Install Products .
6. Click Mach I Series .
7. Click Documentation .
8. Click Getting Started .
9. Click DT3153 .
10. Browse to the directory in which to copy the manual on your
hard disk, the click
Next .
The manual is copied to your hard disk.
11. Click OK .
12. Click Back .
13. Click User’s Manual .
14. Click DT3153 .