manualshive.com logo in svg

Data Translation DT3130 Series, User Manual

Share
Download
Data Translation DT3130 Series User Manual Download Page 28

Chapter 2

12

The following video formats are supported for monochrome and 
composite inputs:

• NTSC 

−

 Standard for 60 Hz, color video signals. In this format, 

the video input is a single analog signal. A video frame is 
displayed as 640 x 480 lines.

• RS-170 

−

 Standard for 60 Hz, monochrome video signals. In this 

format, the video input is a single analog signal. A video frame is 
displayed as 640 x 480 lines.

• PAL 

−

 Standard for 50 Hz, color video signals. In this format, the 

video input is a single analog signal. A video frame is displayed 
as 768 x 576 lines.

• CCIR 

−

 Standard for 50 Hz, monochrome video signals. In this 

format, the video input is a single analog signal. A video frame is 
displayed as 768 x 576 lines.

The Y/C format is supported for S-video inputs. In this format, the 
video input is provided as two separate analog signals. The Y signal 
contains luminance information (the gray-scale portion of the color 
image). The C signal contains chrominance information (the color 
portion of the image). For 60 Hz, a video frame is displayed as 640 x 
480 lines. For 50 Hz, a video frame is displayed as 768 x 576 lines.

Summary of Contents for DT3130 Series

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands