Data Translation DT3130 Series, User Manual

Page: 23 / 160

Overview
7
1
1
1
1
1
1
1
1
1
Accessories
The following accessories are available for the DT3130 Series boards:
• EP311 cable
−
A 2-foot cable with a 15-pin, D-shell connector on
one end that connects to connector J2 on the DT3130 Series
boards and three BNC connectors on the other end. The EP311
cable connects one composite input (VID0) to the DT3131 and
DT3131-ISO board, two composite inputs (VID0 and VID3) to the
DT3132 and DT3132-ISO boards, and three composite inputs
(VID0, VID3, and VID6) to the DT3133 and DT3133-ISO boards.
Refer to
Appendix B for connector pin assignments.
• EP312 cable
−
A 3-foot cable with a 15-pin, D-shell connector on
one end and four 9-pin connectors (containing AWG,
twisted-pair wires) on the other end. The EP312 cable
accommodates all the control signals from the J1 connector on a
DT3130 Series board. Refer to
Appendix B for connector pin
assignments.
• EP314 cable
−
A 2-foot cable with a 15-pin, D-shell connector on
one end and nine BNC connectors on the other end. The EP314
cable connects up to nine composite inputs (VID0 to VID8) to
connector J2 on the DT3130 Series boards. Refer to
Appendix B
for connector pin assignments.
• EP315 cable
−
A 1-foot cable with two 4-pin connectors, and one
2-pin connector. The EP315 cable allows the DT3130 Series board
to p12 V power (1.5 A) for a camera. Refer to
Appendix B
for connector pin assignments.
• EP317 cable
−
A 6-foot cable with one 15-pin, D-shell connector
on one end and one S-video connector on the other end. The
EP317 cable allows you to connect one S-video input (Y1/C1) to a
DT3130 Series board. Refer to
Appendix B for connector pin
assignments.