Data Translation DT3130 Series, User Manual

Page: 10 / 160

About this Manual
x
• Chapter 2 , “Principles of Operation,” describes all of the features
of the boards and how to use them in your application.
• Chapter 3 , “Supported Device Driver Capabilities,” describes the
capabilities supported by the DT3130 Series Device Driver and
the initialized control values.
• Chapter 4 , “Programming Flowcharts,” describes the processes
you must follow to program the DT3130 Series boards using the
DT-Open Layers Frame Grabber SDK and Color SDK Extensions.
• Chapter 5 , “Troubleshooting,” provides information that you can
use to resolve problems with the boards and the device driver,
should they occur.
• Appendix A , “Specifications,” lists the specifications of the
boards.
• Appendix B , “Connector Pin Assignments,” shows the pin
assignments for the connectors on the boards.
• Appendix C , “Modifying the Device Driver,” describes how to
add, modify, and remove a board from the device driver
configuration, and uninstall the device driver, if necessary.
• An index complete this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold .
•
Courier font
is used to represent source code.