Data General AViiON 5500 Series, Installing, Expanding, And Maintaining

Page: 53 / 192

Terminating or extending the internal SCSI bus
2-17
014–002250–01
Computer Unit Rear Panel
Figure 2–12 Installing the SCSI bus terminator plug
Extending the integrated SCSI bus
This section describes how to connect a cable for external SCSI
devices (storage subsystems or stand–alone drives) on the
integrated SCSI bus.
IMPORTANT: With external devices installed, the SCSI bus speed must be
configured for
SLOW operation. For guidelines on setting up and
configuring a SCSI bus, or to connect devices to an expansion SCSI
bus, refer to Chapter 3.
"
To connect external SCSI devices to the AViiON 5500 or 550 series
internal SCSI bus, complete the following steps.
1. Locate the host–to–peripheral device cable.
5–ft cable
10–ft cable
005–39718
005–39719
15396E005
Cable or Cord Type Part Number Model Number
(50–line male CHAMP to 50–pin male P&S)
15396E010