Data Domain DD400 Series, User Manual

Page: 275 / 300

237
replication
NAME
replication - Manage the Replicator for replication of data from one
restorer to another.
SYNOPSIS
replication break
replication disable
replication enable
replication initialize
replication reauth
replication recover
replication set destination < replica-hostname >
replication set source < orig-hostname >
replication set source < orig-hostname > destination < replica-hostname >
replication show config
replication show stats
replication status
replication throttle add < sched-spec > < rate >
replication throttle del < sched-spec >
replication throttle reset { current | override | schedule | all }
replication throttle set current < rate >
replication throttle set override < rate >
replication throttle show [ kb ]
DESCRIPTION
The replication command manages the replication of data between two
restorers, an originator restorer that receives data from backup servers
and a replica restorer that receives data only from the originator. A
restorer can be either an originator or a replica, not both. A replica
that is removed (with the "break" option on either the originator or
replica) from the Replicator pair cannot be brought back into the pair
or used as a replica for another originator unless the filesystem on the
replica is emptied with the
filesys destroy
command. The Replicator
is a licensed feature. If basic options do not work, check licensing.