Data Domain DD400 Series User Manual Download Page 237

Page: 237 / 300

199

alerts

NAME

alerts - Manage the alerts history file and email list.

SYNOPSIS

alerts add

email-list

alerts del

email-list

alerts reset

alerts show

alerts-list

alerts show

all

alerts show

{

current

history

daily

}

alerts test "

reason

email-addr

DESCRIPTION

The

alerts

command manages the alerts history file and who receives

email notification for system alerts. Alerts happen whenever Restore

Protection Manager discovers a problem with software or a monitored

hardware component.

OPERATIONS

add

Add email addresses to the list that receives system alert emails.

The <

email-list

> is a list of email addresses that are comma-

separated or space-separated or both. Administrative users only.

del

Delete email addresses from the list. The <

email-list

> is a list of

email addresses that are comma-separated or space-separated or

both. Administrative users only.

reset

Set the email list to the factory default of

[email protected]

. Administrative users only.

show alerts-list

Display the alerts email list.

show all

Display the alerts email list and the administrator email address.

show current

Display alerts for all situations that have not been dealt with.

For example, a message about a problem fan displays until the

fan is replaced with a functional unit.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands