Data Domain DD400 Series User Manual Download Page 203

Page: 203 / 300

Chapter 17: SNMP Management and Monitoring

165

Display Trap Hosts

Display Trap Hosts

To display the trap host list on a restorer, use the

snmp show trap-hosts

operation.

snmp show trap-hosts

The output is similar to the following:

snmp show trap-hosts

Trap Hosts:

admin10

admin11

Display All Parameters

The SNMP configuration entries set by an administrator are:

•

sysLocation

The system location as used in the SNMP MIB II System variable

sysLocation

•

sysContact

The system contact as used in the SNMP MIB II System variable

sysContact

•

Trap Hosts

The list of machines that receive SNMP traps generated by the restorer.

•

Read-only Communities

One or more read-only community strings that enable access to the

restorer

•

Read-write Communities

One or more read-write community strings that enable access to the

restorer.

Display

To display all of the SNMP parameters, use the

snmp show config

operation. Administrative

users only.

snmp show config

The output is similar to the following:

snmp show config

----------------------

-------------------

SNMP sysLocation

bldg3-rm222

SNMP sysContact

[email protected]

Trap Hosts

admin10 admin11

Read-only Communities

public snmpadmin23

Read-write Communities

private snmpadmin1

----------------------

-------------------

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands