Data Domain DD400 Series, User Manual

Page: 188 / 300

Set a Temporary Throttle Rate
150 DD400 Series Restorer User Guide
Set a Temporary Throttle Rate
To set a throttle rate until the next scheduled change or until a system reboot, use the
throttle
set current
operation. A temporary rate cannot be set if the
replication throttle
set override
command is in effect.
replication throttle set current rate
The rate includes a number or the word
unlimited
. The number can include a tag for bits or
bytes per second. Do not use a space between the number and the bits or bytes specification. For
example,
2000KB . The default rate is bits per second. In the rate variable:
•
bps or b equals raw bits per second
•
Kbps , Kb , or K equals 1024 bits per second
•
Bps or B equals bytes per second
•
KBps or KB equals 1024 bytes per second
The rate can also be 0 (the zero character), disable , or disabled . Each stops replication until the
next rate change.
As an example, the following command sets the rate to 2000 kilobytes per second:
# replication throttle set current 2000KB
Note
The system enforces a minimum rate of 98,304 bits per second (12 KB).
Set an Override Throttle Rate
To set a throttle rate that overrides scheduled rate changes, use the
throttle set override
operation. The rate stays at the override level until another override command is entered. An
override cannot be set if the
replication throttle set current
command is in effect.
replication throttle set override rate
The rate includes a number or the word
unlimited
. The number can include a tag for bits or
bytes per second. Do not use a space between the number and the bits or bytes specification. For
example,
2000KB . The default rate is bits per second. In the rate variable:
•
bps or b equals raw bits per second
•
Kbps , Kb , or K equals 1024 bits per second
•
Bps or B equals bytes per second
•
KBps or KB equals 1024 bytes per second
The rate can also be 0 (the zero character), disable , or disabled . Each stops replication until the
next rate change.