Data Domain DD400 Series User Manual Download Page 177

Page: 177 / 300

Chapter 14: CIFS Management

139

CIFS Command

Add an IP Address/NetBIOS hostname Mapping

To add an IP address/NetBIOS hostname mapping to the

lmhosts

file, use the

cifs hosts

add

ipaddr host-list

operation. One IP address can have multiple host names.

cifs hosts add

ipaddr host-list

For example, to add the IP address for the machine

srvr22

cifs hosts add 192.168.10.25 srvr22

Added "srvr22" -> "192.168.10.25" mapping to hosts list.

Remove an IP Address/NetBIOS hostname Mapping

To remove an IP address/NetBIOS hostname mapping from the

lmhosts

file, use the

cifs

hosts del

ipaddr

operation.

cifs hosts del

ipaddr

For example, to remove the IP address 192.168.10.25:

cifs hosts del 192.168.10.25

Removed mapping 192.168.10.25 -> srvr22.

Resolve a NetBIOS Name

To display the IP address used for any NetBIOS name on the WINS server, use the

cifs

nb-lookup

operation. The CIFS feature must already be enabled.

cifs nb-lookup

net-bios-name

For example, to display the IP address for the machine

srvr22

cifs nb-lookup srvr22

querying srvr22 on 192.168.1.255

192.168.1.14 morgan<00>

Identify a WINS server

To identify a WINS server for resolving NetBIOS names to IP addresses, use the

cifs set

wins-server

operation.

cifs set wins-server

ipaddr

For example, to use a WINS server with the IP address of

192.168.1.12

cifs set wins-server 192.168.1.12

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands