Data Domain DD400 Series User Manual Download Page 162

Page: 162 / 300

The Net Command

124

DD400 Series Restorer User Guide

Display DNS Servers

To display the DNS servers used by a restorer, use the

net show dns

operation.

net show dns

The display looks similar to the following. The last line informs that the servers were configured
manually or by DHCP.

net show dns

Server

-----------

192.168.1.3

192.168.1.4

-----------

Showing DNS servers configured manually.

Display Network Statistics

To display network statistics, use the

net show stats

operation. The information returned

from all the options is used by Data Domain support staff for troubleshooting.

net show stats [all | interfaces | listening | route |
statistics]

all

Display summaries of the other options.

interfaces

Display the kernel interface table and a table of all network interfaces and their activity.

listening

Display statistics about active internet connections from servers.

route

Display the IP routing tables showing the destination, gateway, netmask, and other

information for each route.

statistics

Display network statistics for protocols.

The display with no options is similar to the following, with statistics about live client connections.

net show stats

Active Internet connections (w/o servers)

Proto Recv-Q Send-Q Local Address

Foreign Address

State

tcp

20 123.234.78.90:21 123.234.78.11:512 ESTABLISHED

tcp

123.234.78.90:34 123.234.78.27:673 TIME_WAIT

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands