Data Domain DD400 Series, User Manual

Page: 116 / 300

Hourly System Status
78 DD400 Series Restorer User Guide
Display the Autosupport History
To display all autosupport messages, use the
autosupport show history
operation. Use
the J key to scroll down through the file, the K key to scroll up, and the Q key to exit. The operation
displays entries from all of the
messages
system logs, which hold messages for up to ten weeks.
autosupport show history
The command returns entries similar to the following:
# autosupport show history
Nov 10 03:00:19 scheduled autosupport
Nov 11 03:00:19 scheduled autosupport
Hourly System Status
The restorer automatically generates a brief system status message every hour. The message is sent
to the system log and to a serial console if one is attached. To see the hourly message, use the
log
view
command. The message reports system uptime, the amount of data stored, the number of
NFS operations, and the amount of disk space used for data storage (as a percentage). For example:
# log view
Nov 12 13:00:00 localhost logger: at 1:00pm up 3 days, 3:42, 52324 NFS ops, 84763 GB data
col. (1%)
Nov 12 14:00:00 localhost logger: at 2:00pm up 3 days, 4:42, 59411 NFS ops, 84840 GB data
col. (1%)