Data Domain DD400 Series User Manual Download Page 110

Page: 110 / 300

Alerts

DD400 Series Restorer User Guide

Display the Alerts History

The alerts history lists alerts messages from all of the existing

messages

system log files, which

hold messages for up to ten weeks.

Display

To display the history of alerts messages, use the

alerts show history

operation or click

Autosupport

in the left panel of the DDR Manager and look at

Alert History

. Use the up and down

arrow keys to move through the display. Use the

key to exit. Enter a slash character (/) and a

pattern to search for and highlight lines of particular interest.

alerts show history

The command returns entries similar to the following:

alerts show history

Alert Time

Description

---------------

---------------------------------------------

Nov 11 18:54:51

Rear fan #1 failure: Current RPM is 0,

nominal is 8000

Nov 11 18:54:53

System rebooted

Nov 12 18:54:58

Rear fan #2 failure: Current RPM is 0,

nominal is 8000

---------------

---------------------------------------------

Display the Email List

The alerts email list includes an address for Data Domain support. Addresses that you add to the list
appear as local or fully-qualified addresses exactly as you enter them.

Display

To display all email addresses in the alerts list, use the

alerts show alerts-list

operation

or click

Autosupport

in the left panel of the DDR Manager and look at

Mailing Lists

Alert Email

List

alerts show alerts-list

The display is similar to the following:

alerts show alerts-list

Alert email list

[email protected]

admin12

[email protected]

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands