Data Domain DD400 Series User Manual Download Page 108

Page: 108 / 300

Alerts

DD400 Series Restorer User Guide

Alerts

Use the

alerts

command to administer the alerts feature.

Add to the Email List

To add an email address to the alerts list, use the

alerts add

operation. By default, the list

includes an address for Data Domain support staff. The

email-list

is a list of addresses that are

comma- separated or space-separated or both. After adding to the list, always use the

alerts

test

operation to test for mailer problems. Administrative users only.

alerts add

email-list

For example, to add an email address to the alerts list:

alerts add [email protected]

Test the Email List

To test the alerts list, use the

alerts test ”

reason

”

operation, which sends an email with

the

reason

to each address on the list or to a specific address. Use double quotes around the

reason

After adding addresses to the list, always use this operation to test for mailer problems.

alerts test “

reason

” [

email-addr

]

For example, to test the list with a reason of

Testing the alerts email list

alerts test “Testing the alerts email list”

Remove from the Email List

To remove an email address from the alerts list, use the

alerts del

operation. The operation is

for administrative users only. The

email-list

is a list of addresses that are comma-separated or

space-separated or both. Administrative users only.

alerts del

email-list

For example, to remove an email address from the alerts list:

alerts del [email protected]

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands