dCS Scarlatti DAC
User Manual
Software Issue 1.2x
August 2011
Flename: Scarlatti DAC Manual v1_2x.docx
Page 12
English
version
F
RONT
P
ANEL
S c a rla tti
dCS
MUTE
MENU
INPUT
FILTER
SYNC
DISPLAY
POWER
A B C D E
F
G H I
J
Figure 4 – Front panel
POWER
Button
To switch on, ensure the rear panel switch is set to
I
and press the
POWER
button (A) on the front
panel once. Note that the unit cannot be turned on from the remote control.
To set the unit to sleep mode, press the
POWER
button once. The main display will turn off, the LED
over the button will light, and the analogue outputs will mute, but the unit will remain close to running
temperature. Press again to return to normal operation.
To switch off, hold down the
POWER
button for about 5 seconds until
Power Down
appears on the
display, then release it.
When the menu is open, press the
POWER
button to close the menu.
DISPLAY
Button
Press the
DISPLAY
button (B) to turn the main display off and on. When the display is off, the LED
over the button will light to warn you that the unit is running.
