gForce Ultra IOM
75
Local Control for Charging
•
Press the “Hand on” button. The display will show Hand Local Running.
•
Use the
and
keys to move the cursor to the desired digit position, then use the
and
keys to increase or decrease the desired RPM setting. As you change the value, the
compressor will increase or decrease in speed.
•
See example display below:
•
When done charging,
press the “Auto on” key to return to normal operation controlled by the
dap4 controller.
To View the Drive Alarms
•
Press the Alarm log key
•
Use the
and
keys to move the cursor through the various alarms.
•
See example display below:
Summary of Contents for gForce Ultra
Page 1: ......
Page 123: ...gForceUltraIOM_11 2022 docx...
