Dascom Tally 1325, User Manual

Page: 30 / 100

Tally Dascom 1325
16
Offline State
Function Name
Switch
Operation
LED Function Description
Slip [S1] L2 
Press and hold this key until printer beeps twice to activate
the Slip profile mode. L2 will turn on.

Press and hold this key until printer beeps twice to exit the
Slip profile mode. L2 will turn off.
Exit Dir {S2} L3 This is valid for single sheet mode only. It controls the exit
direction of the friction sheet paper.
Load/Eject {S3} -

Load: Automatically loads the paper (according to path
selection) when no paper is on the platen.

Eject: For rear tractor, it retracts the form from the platen to
allow users to install cut sheets. (NOTE: Users have to
toggle the path selection lever.)
For cut sheets, it ejects the form on the platen.
Online {S4} L4 Toggles between Online and Offline states
Micro Forward {S3}+[S4] - While holding down S4, press S3 to micro feed paper up.
Micro Reverse {S2}+[S4] - While holding down S4, press S2 to micro feed paper down.
Clear Buffer and
Reset {S1}+[S4] -

Clears the print buffer. Beeps once upon completion.

Pressing S1 longer initializes the printer to default settings.
Beeps 3 times upon completion.