UMN:CLI
User Manual
V8102
620
NAME: route map name
no neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
route-map
NAME
{
in
|
out
}
Removes the connection with configured route-map.
12.1.17.4
Force Shutdown
The V8102 supports the feature to force to shutdown any active session for the specified
BGP router or peer group and to delete the routing data between them. It shutdowns all
connections and deletes the received path information from neighboring router or peer
group.
To disable the exchange information with a specified router or peer group, use the follow-
ing command.
Command
Mode
Description
neighbor
{
A.B.C.D
|
X:X::X:X |
WORD
}
shutdown
Router
Shutdowns any active session for the specified router
or peer group and delete all related routing data.
A.B.C.D: neighbor IP address
X:X::X:X: BGP neighbor IPv6 address
WORD: peer group name or neighbor tag
no neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
shutdown
Enables the sessions with a previously existing neigh-
bor or peer group that had been disabled.
12.1.17.5
Changing the Nexthop Information
When you use the command to change the nexthop information that is sent to the iBGP
peer, the nexthop information is set the IP address of the interface used to communicate
with the neighbor. To configure the router as the next hop for a BGP-speaking router or
peer group, use the following command.
Command
Mode
Description
neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
next-hop-self
Router
AF
Configures the router as the next hop for a BGP-
speaking router or peer group.
A.B.C.D: BGP neighbor IP address
X:X::X:X: BGP neighbor IPv6 address
WORD: peer group name or neighbor tag
no neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
next-hop-self
Deletes the configured router as the next hop for a
BGP-speaking router or peer group.
12.1.17.6
Changing the Nexthop Information
When you use the command to change the nexthop information that is sent to the iBGP
peer, the nexthop information is set the IP address of the interface used to communicate
with the neighbor. To configure the router as the next hop for a BGP-speaking router or
peer group, use the following command.
Command
Mode
Description
neighbor
{
A.B.C.D
|
X:X::X:X
|
Router
Configures the router as the next hop for a BGP-
