User Manual
UMN:CLI
V8102
303
8.5.1.4
Authentication Port
After configuring 802.1x authentication mode, you should select the authentication port.
Command
Mode
Description
dot1x nas-port
PORTS
Global
Designates 802.1x authentication port.
no dot1x nas-port
PORTS
Disables 802.1x authentication port.
8.5.1.5
Force Authorization
The V8102 can permit the users requesting the access regardless of the authentication
from RADIUS server. For example, even though a client is authenticated from the server,
it is possible to configure not to be authenticated from the server.
To manage the approval for the designated port, use the following command.
Command
Mode
Description
dot1x port-control
{
auto
|
force-
authorized
|
force-unauthorized
}
PORTS
Global
Configures a state of the authentication port.
auto: authorization up to RADIUS server (default)
force-authorized: force authorization
force-unauthorized: force unauthorization
no dot1x port-control
PORTS
Deletes a configured authentication port state.
8.5.1.6
Interval for Retransmitting Request/Identity Packet
In the V8102, it is possible to specify how long the device waits for a client to send back a
response/identity packet after the device has sent a request/identity packet. If the client
does not send back a response/identity packet during this time, the device retransmits the
request/identity packet.
To configure the number of seconds that the switch waits for a response to a re-
quest/identity packet, use the following command.
Command
Mode
Description
dot1x timeout tx-period
<1-
65535>
PORTS
Global
Sets reattempt interval for requesting request/identity
packet.
1-65535: retransmit interval (default: 30)
no
dot1x
timeout
tx-period
PORTS
Disables the interval for requesting identity.
8.5.1.7
Number of Requests to RADIUS Server
After 802.1x authentication configured as explained above and the user tries to connect
with the port, the process of authentication is progressed among user’s PC and the
equipment as authenticator and RADIUS server. It is possible to configure how many
times the device which will be authenticator requests for authentication to RADIUS server.
