19
Hills – VoiceNav Lite User Manual V1.1
Configure (set up) authority levels for a specific user
Step
1. [
MENU
] - [
5
] Selects main menu - User configuration
2. [
?
]-[
?
]-[
?
]-[
?
]
Enter your master PIN code
3.
[3]
Selects configure user authority
4. [
?
]
-
[
ENTER
]
Select the user to configure
5. [
?
]
Select the options required for this user (See table 1)
Note: zone lights will indicate selected authority options.
6. [
MENU
]
Moves back to user configuration menu (step 3)
7. [
MENU
]
Moves back to main menu
8. [
MENU
]
Exits main menu
Table 1.
User Authority Options Selection Table
Reserved
Arm / disarm code
Arm only
Allowed to bypass zones
Arm only after close window
User code will send open, close
reports
Master code authority
Must be off.
Note:
The system must be disarmed before accessing user configuration.
Do not remove all areas from a users area control. Use extreme caution when
modifying a user with master code authority.
If you attempt to enter a PIN code that is already being used by another user,
the following announcement will be heard “
PIN code has failed”
followed by
three fast beeps, simply select another PIN code.
Keep user PIN information in a safe place, do not disclose your PIN to others.
Contact your service provider to confirm available PIN codes and areas on your
system.
